In very simple terms the Lif3 Smartchip is an ultra-thin adhesive that attaches to the back of your smartphone. It includes both microwave-absorbing material and radio frequency coupler technology. The former absorbs radiation from the antenna of your smartphone, while the latter disperses that radiation through the back of the phone and away from your head or body. The result is that your radiation exposure is reduced by up to 99%*. The Lif3 Smartchip may not look like much, but this ground-breaking game changer works to reduce exposure to your brain and other important body parts, with virtually no impact on your phone’s transmission signal.
The Lif3 Smartchip cell phone radiation reduction product is laboratory tested to prove it reduces your exposure to smartphone electromagnetic fields (by up to 99%*). Lif3 models have been independently tested by the A2LA accredited RF Exposure Lab in California and the NATA accredited EMC Technologies laboratory located in Australia, so you’ll know how effective the product for your particular phone is. For more information head over to our Evidence page.
Electromagnetic radiation, or.com EMR, is emitted from many of the devices we use today to transmit information. Cell phones and tablets use the range of 450–2100 MHz.
Your exposure to this radiation can be minimized by putting distance between you and your phone, but this isn’t always practical. Applying a Lif3 Smartchip to the back of your phone diverts a substantial amount of this radiation away from your head and body. Read The Education for more about the risks.
Lif3 Smartchips are independently tested for their effectiveness and found to have virtually no impact on your signal transmission.
Every cell phone device is designed with different specifications, so we’ve developed different Lif3 Smartchips for the most popular phone models to minimize your radiation exposure with virtually no impact on the transmission signal. You’ll need to select the right Smartchip for your particular device, which can be seen over on our Product Range page.
The Lif3 Smartchip is not yet available for iPads or Tablets, however we anticipate having a suitable Smartchip for iPads and Tablets available in our range later this year.
The Lif3 Smartchip is super simple to apply. The hi-tech Smartchip simply adheres onto the back of your device, and at only 0.35mm thin most protective cases fit easily over it. You’ll receive instructions for the correct placement along with your Smartchip.
The Lif3 Smartchip is incredibly thin at just 0.35mm. Most phone and device cases will fit over this, so you can change your style as often as you change your socks. Adhere the Smartchip on, put your case over the top and get on with life knowing you’re reducing your radiation exposure.
Lif3 Smartchips are designed to work for the lifetime of your phone. Providing you take reasonable care of your phone, you can expect several years of effective use.
As each Lif3 Smartchip is designed for the device’s unique specifications, you’ll need to upgrade your Lif3 Smartchip when you upgrade or replace your phone. If you pass your old phone onto someone in your family you can leave the Lif3 Smartchip on, knowing that their exposure to cell phone radiation is minimized. If you are replacing your phone because it is no longer working, you will need to purchase a new Lif3 Smartchip specific for your replacement phone.
Basically you should treat your Lif3 Smartchip as you would your phone or device – after all, it is attached to it! We recommend treating it like any electronic device and not exposing the Smartchip to moisture or leaving it in the sun, as this could damage its technology.
You can order online here.